Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, operational performance, current sharing, SULTAN, China, Europe, test results, n-value, mechanical properties, strain effects, ac losses
Kim J.H., Li H., Yanmaz E., Devred A., Liu Y., Hossain M.S., Gajda D., Ma Z., Patel D., Cai Q., Qiu W., Somer M., GUO Q., Jie H., Luzin V., Yamauchi Y., Fatehmulla A., Farooq W.A., Bando Y., Pradhan S.*10
Ключевые слова: MgB2, bulk, magnetization, microstructure, critical caracteristics, Jc/B curves
Ключевые слова: ITER, cable-in-conduit conductor, LTS, NbTi, Nb3Sn, minimum quench energy, modeling, test results
Shi Y., Li J., Devred A., Nijhuis A., Wu Y., Liu H., Liu F., Qin J., Zhou C., Yagotintsev K.A., Dai C., Lubkemann R., Mao Z., Anvar V.A.
Ключевые слова: cable-in-conduit conductor, fusion magnets, design, strands, LTS, Nb3Sn, Cu-based conductors, twisting, twist-pitch, mechanical properties, stress effects, strain effects, design parameters, displacements, loads, cycling, mechanical losses, elastic behavior, ac losses, experimental results, new
Ключевые слова: ITER, feeder, bus bar conductor, high voltage process, insulating medium, friction, experimental results, resistance
Zanino R., Bruzzone P., Breschi M., Isono T., Zani L., Devred A., Martovetsky N., Nabara Y., Bessette D., Bonifetto R., Savoldi L.
Ключевые слова: ITER, central coils, LTS, Nb3Sn, strands, test results, SULTAN, mechanical properties, strain effects
Zanino R., Bruzzone P., Mitchell N., Breschi M., Nunoya Y., Okuno K., Takahashi Y., Isono T., Ciazynski D., Zani L., Saito T., Smirnov A., Kawano K., Devred A., Martovetsky N., Torre A., Nabara Y., Bessette D., Nicollet S., Duchateau J.-L., Bonifetto R., Suwa T., Reiersen W., Gauthier F., Ozeki H., Savoldi L., Khodak A., Louzguiti A., Rodin I.*10, Tronza V.*11
Ключевые слова: ITER, central coils, coils insert, test results, degradation studies, ac losses, mechanical properties, strain effects, quench propagation, stability, heating rates
Ключевые слова: LTS, Nb3Sn, strands, ITER, ac losses, critical caracteristics, Jc/B curves, scaling law, magnetization, hysteresis, experimental results
Bruzzone P., Stepanov B., Liu B., Devred A., Wu Y., Liu H., Long F., Yu M., Liu F., Qin J., Sedlak K.
Ключевые слова: ITER, bus bar conductor, LTS, NbTi, ac losses, strands, design parameters, termination, experimental results, numerical analysis
Mitchell N., Kim H., Ilyin Y., Chen L., Chen Y., Devred A., Clayton N., Gung C., Ding K., Lu K., Beemsterboer C., Farek J., Wen X., Man S., Naoyuki S.
Ключевые слова: bus bar conductor, ITER, joints, design, test results, feeder, heat loads, pressure drop
Bruzzone P., Stepanov B., Liu B., Devred A., Wu Y., Liu H., Long F., Yu M., Liu F., Qin J., Sedlak K.
Ключевые слова: ITER, correction coils, LTS, NbTi, strands, cables, critical caracteristics, ac losses, SULTAN, test results, critical temperature, critical current
Ключевые слова: ITER, LTS, Nb3Sn, cable-in-conduit conductor, design parameters, prototype, cycling, SULTAN, strands, surface, roughness, twist-pitch, microstructure, test results
Devred A., Girard A., Bonnay P., Luchier N., Manzagol J., Attard A., Bizel-Bizellot L., Huygen S., Journeaux J.-Y.
Ключевые слова: ITER, magnets, measurement technique, sensors, cryogenic systems, temperature distribution, test results
Mitchell N., Koizumi N., Matsui K., Hamada K., Seo K., Hemmi T., Devred A., Alekseev A., Gung C., Harrison R., Gallix R., Jong C., Foussat A., Oliva A.B., Boyer C., Nakahira M., Gandel M., Rebollo E.B., Petit P., Journeaux J.Y., Koczorowski S., Rest M.L., Martin B., Reich J., Bellesia A.
Ключевые слова: ITER, coils toroidal, magnetic systems, LTS, Nb3Sn, winding techniques, installation, cable-in-conduit conductor, coils pancake, heat treatment, impregnation, fabrication, review
Ключевые слова: ITER, coils toroidal, cryogenic systems, cryostat, electromagnetic forces, mechanical properties, thermal loads, modeling, numerical analysis
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Huang X., Liu C., Ding K., Lu K., Feng H., Niu E., Du Q., Vergara A., Zhu S*1., Fernandez-Hernando L.
Ключевые слова: ITER, correction coils, current leads, HTS, Bi2223, prototype, fabrication, joint resistances, overheating, pulsed current, test results
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Liu C., Ding K., Lu K., Niu E., Ran Q.
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, fabrication, test results, prototype, LTS, NbTi, cable-in-conduit conductor, joints, solder, heat exchanger
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.